Werner Brushware

  • Cnr 1st Street & 2nd Avenue, Booysens Reserve, 2091

011 835 2136

Call us

Need Help?

Let's Chat

TUBE AND PORT BRUSHES

WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-05
WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-06
WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-07

BOILER TUBE BRUSHES

Available in

  • End TYPE

    SINGLE-LOOP END
    THREADED END

  • Wire material

    CARBON STEEL
    STAINLESS STEEL
    BRASS
    NYLON

Boiler tube cleaning is a vital part of vessel maintenance in refineries, power and processing plants, and similar industrial facilities. Werner’s boiler tube brushes are available in various sizes and wire types to suit the application, including nylon, brass, and carbon or stainless steel. Features galvanised twisted wire.

Diameter: 25m – 240mm

Brush Lay: 120mm

Brush Total Length: 220mm 

Wire Thickness: 0.35 – 0.55

Thread: ½” BSW

Depending on the application, water, gases, and other caustic chemicals being run through the unit will cause deposit build-up inside of the tubes, inhibiting water flow and heat transfer. This results in a loss in operating efficiency.

These mineral deposits or “scaling” can be removed through mechanical or chemical cleaning methods, depending on the thickness and type of deposits being removed.

For use with a drill or pneumatically actuated cleaning tools. Start by draining and flushing the unit. Scrub the tubes clean, while using low-pressure water to flush out debris. This type of cleaning is quick and reduces the volume of wastewater produced.

Note: Use nylon or brass for nonferrous tubes and steel for ferrous metal tubes. Size your brush as close to the tube ID as possible to ensure optimal results. Always wear appropriate PPE. 

01 WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-01
02 WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-02
03 WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-03
04 WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-04
05 WERNER _ WEBSITE IMAGES _ PRODUCTS 3 [MARCH 2025] WF-10

CONDENSER TUBE BRUSHES

Available in

  • End TYPE

    SINGLE-LOOP END
    THREADED END

  • Wire material

    CARBON STEEL
    STAINLESS STEEL
    BRASS
    NYLON

Condenser tube cleaners are indispensable maintenance tools in refineries, power and processing plants, and similar industrial facilities. Werner condenser tube brushes are available in various sizes and wire types to suit the application, including nylon, brass, and carbon or stainless steel. Features galvanised twisted wire.

Diameter: 10m – 25mm

Brush Lay: 120mm

Wire Thickness: 0.35

Thread: ¼” BSW (10 – 15mm Diameter) 5/16” BSW (15 – 25mm)

Tube cleaning is a necessary part of vessel maintenance, such as condensers, chillers, and other heat exchangers. The best cleaning results are achieved when the correct brush style and size are chosen.

For use with a drill or pneumatically actuated cleaning tools. Start by draining and flushing the unit, if applicable. Scrub the tubes clean, while using low-pressure water to flush out debris. This type of cleaning is quick and reduces the volume of wastewater produced.

Note: Do not exceed maximum rotation speed indicated on packaging or tech spec sheet. Always wear appropriate PPE.

04 WERNER _ WEBSITE IMAGES _ END BRUSHES PORT CLEANERS [MARCH 2025]-15
03 WERNER _ WEBSITE IMAGES _ END BRUSHES PORT CLEANERS [MARCH 2025]-14
02 WERNER _ WEBSITE IMAGES _ END BRUSHES PORT CLEANERS [MARCH 2025]-13
01 WERNER _ WEBSITE IMAGES _ END BRUSHES PORT CLEANERS [MARCH 2025]-12

END BRUSHES

Available in

  • Mounting & TRIM

    SHANK MOUNTED
    FLAT OR POINTED TRIM

  • Wire material

    CARBON STEEL
    STAINLESS STEEL
    BRASS

Werner’s range of port cleaning (end) brushes is made for light to medium-duty deburring, cleaning, and rust removal. The crimped wire filament is flexible enough to follow the contours of a workpiece, while giving access to hard-to-reach cavities and holes. The wires also flare out during operation, making them effective in cleaning pipe and tube IDs. Available in flat and pointed trim (crimped wire only), as well as a 38mm Busby trim (straight wire).

Diameter: 6 – 25mm Flat trim, 20mm Pointed Trim, 38mm Busby Trim

Wire Thickness: 0.30 (Crimped), 0.35 (Busby)

Mounting: Shank/Spindle

Werner’s range of crimped wire decarbonising brushes can be effectively used to clean hard-to-reach areas such as drilled holes, recesses and corners. They are well suited for removing burrs, rust and paint.

For use with a drill or air tool. Refer to maximum and optimum operating/rotational speeds indicated on packaging or tech spec sheet.

Note: Do not exceed maximum rotation speed indicated on packaging or tech spec sheet. Do not apply excessive pressure. Always wear appropriate PPE such as eye and ear protection and/or a dust mask and gloves. Avoid material cross-contamination. 

BACK

OTHER PRODUCTS

ROTARY
BRUSHES

SIDE
BRUSHES

FLOOR POLISHER
BRUSHES

SQUARE DRIVE
BRUSHES

LATEST ARTICLES

Stay up to date with the latest products, as well as industry news and the latest innovations. We’re continually adding new posts, so check back in soon.

More Articles